JUMPER CABLE 15kv/25kv/35kv

Jumper cables, also known as booster cables, are primarily used to jump-start a vehicle with a dead battery by connecting it to a functioning battery. They can also be used in other high-power situations, such as powering industrial equipment during a blackout or providing a temporary power boost to machinery.

• Get a quote by email: supplier@huadongcablegroup.com

Obtener Presupuesto

Construction:

• Conductor material: Annealed Flexible Bare Copper per ASTM B3 & ASTM B172 or Tinned Copper per ASTM B33 & ASTM B172
  Gauge: 4/0 15KV, 2/0 15KV, 1/0 15KV, #2 15KV, 1/0 25KV, 2/0 25KV, 1/0 35KV, 2/0 35KV
  Insulation material: Thermoset Ethylene-Propylene Rubber (EPR)
  Separator material: Semi-conductive tape separator between the copper and EPR Insulation
  Operating Temperature: -60°C to 105°C
  Meets Requirements: ASTM F2321 – Flexible and Rigid Insulated Temporary By-Pass Jumpers
• Features
  • EPR CV-cured jacket resists abrasion, heat, moisture, and ultraviolet rays
  • Annealed copper stranding is extra flexible
  • Flexible at low temperatures
  • Water-resistant
  • Standard Color: Orange
  • 3rd party performance tested

• Get a quote by email: supplier@huadongcablegroup.com

Obtener Presupuesto

Installation
These cables must be positioned away from contact with grounds, transformer cases, cross-arms, etc. to avoid possible high stress and capacitance leakage due to the fact that jumper cables cannot be protected against prolonged contact with other conductors or grounds by shielding.